SP901E SPI Signal Amplifier for WS2812B, WS2811, WS2813, etc Pixel RGB LED Strip

About SP901E SPI Signal Amplifier

• Note: It is not a controller. It works in tandem with the controller.4- or 5-pin RGB/RGBW IC-chip 5050 LED strips are not supported. This SP901E SPI Signal Amplifier is compatible with all kinds of 5V-TTL dual signals. It receives one signal and simultaneously outputs 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as the main controller.
• It can output 8 channels for addressable LED strips with a single data wire, such as WS2812B, WS2811, SK6812RGB, SK6812-RGBW, SM16703, etc. It can output 4 channels for addressable LED strips with data and clock wires (WS2801, APA102, SK9822) or dual data wires (WS2813, WS2815).
• Because they have the same serial, you can use one controller to control DC5V WS2812B and DC5V WS2813 LED strips at the same time, as well as DC12V WS2811, DC12V WS2815, DC12V 1903, and DC12V 6803 via this serial amplifier.
• DC5V–24V has a wide range of working voltages, but it cannot regulate the output voltage. That means the output voltage of the power supply must be the same as the working voltage of your LED lights. The current through the amplifier is limited; when the current consumed is high, you need to add the power supply for the corresponding voltage.
• Multiple signal amplifiers can be cascaded together synchronously. Ideal for small and medium-sized dream color lighting projects. It can work with the K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry Pi, and Arduino X2 music controller.